Professor

● Name & Affiliation
Name Mansoo Joun Position Professor
Affiliation School of Mechanical and Aerospace Engineering, Gyeongsang National University E-mail msjoun@gnu.ac.kr
Telephone +82-55-772-1624 FAX
Laboratory Gyeongsang National University 403-102
Address School of Mechanical and Aerospace Engineering, Gyeongsang National University, 900 Kajoadong, Jinju, GyeongNam, Korea, 660-701
Homepage http://msjoun.gnu.ac.kr
● Research and Teaching Experiences
’79∼’83 Undergraduate student, Department of Mechine Design and Production Engineering, Seoul National University (BS)
’83∼’85 Graduate student(MS degree), Department of Mechanical Engineering, Korea Institute of Science and Engineering(KAIST)
’85∼’89 Research Team Leader, Samsung Aerospace Industry Company, Co.
’89∼’92 Graduate student(Ph.D degree), Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH)
Student Researcher of RIST
’92∼ Professor, School of Mechanical and Aerospace Engineering, Gyeongsang National University (Professor)
’97∼’98 Visiting professor, Department of Mechanical Engineering, The Ohio State University
03~Present School of Mechanical and Aerospace Engineering, Gyeongsang National University
00~Present Vice-Director, Technology Innovation Center of Gyeongsang National University
03~04 Vice-Dean of Research and Planning, Gyeongsang National University
● Major Publications
Authors Subject Journal Page Publisher Year
Man Soo Joun, Ho Keun Moon, In Soo Choi, Min Cheol Lee, Byung Yoon Jun Predicting polygonal-shaped defects during hot ring rolling using a rigid-viscoplastic finite element method Tribology International 311~319 Elsevier 2009
Min Cheol Lee, S H Chung, Sung Min Jang, Man Soo Joun Three-dimensional simulation of forging using tetrahedral and hexahedral elments inite Elements in Analysis and Design 745~754 Elsevier 2009
Ho Keun Moon, Min Cheol Lee, Man Soo Joun Predicting polygonal-shaped defects during hot ring rolling using a rigid-viscoplastic finite element method Int. J. Mechanical Sciences 306~314 Int. J. Mechanical Sciences 2008
M.C.Lee, S.H.Chung, J.H.Cho, S.T.Chung, Y.S.Kwon, H.J.Kim, M.S.Joun Three-dimensional finite element analysis of a powder compaction process for forming the cylinder block of hydraulic pump Powder Metallurgy 89~94 Powder Metallurgy 2008
ManSoo Joun, Jea Gun Eom, Min Cheol Lee A new method for acquiring true stress-strain curves over a large range of strains using atensile test and finite element method Mechanics of Materials 586~593 Mechanics of Materials 2008
M.C.Lee, M.S.Joun Adaptive triangular element generation and optimization-based smoothing: Part 1. On the plane Advances in Engineering Software 25~34 Advances in Engineering Software 2008
M.C.Lee, M.S.Joun Adaptive triangular element generation and optimization-based smoothing: Part 2. On the surface Advances in Engineering Software 35~46 Advances in Engineering Software 2008
문호근, 정재헌, 문석찬, 전만수 베어링 궤도 선삭가공용 총형공구의 형상 보정기법 한국정밀공학회지 50~55 한국정밀공학회지 2008
Y.S.Kwon, S.T.Chung, J.H.Lee, M.S.Joun, S.Lee, J.W.Noh, S.J.Park, R.M.German EDM Performance of W-Cu Electrodes by Nano Tungsten Coated Copper Composite Powder Advanced Particulate Materials & Processes 306~316 2008
M. C. Lee, S. H. Chung, J. H. Cho, S. T. Chung, Y. S. Kwon, M. S. Joun Three-Dimensional Finite Element Analysis of a Powder Compaction Process for Forming the Cylinder Block of a Hydraulic Pump Powder Metallurgy Powder Metallurgy 2007
H. K. Moon, M. C .Lee,M. S. Joun An approximate efficient finite element approach to simulating a rorary forming process and its application to a wheel-bearing assembly Finite Elements in Analysis and Design 17-23 Finite Elements in Analysis and Design 2007
H. K. Moon, M. S. Joun Predicting polygonal-shaped defects during hot ring rolling using a rigid-viscoplastic finite element method Int. J.MechanicalSciences Int. J.MechanicalSciences 2007
M. S. Joun, I. S. Choi, J. G. Eom, M. C. Lee Finite Element Analysis of Tensile Testing with Emphasis on Necking Computational Material Science 63-69 Computational Material Science 2007
M. S. Joun, J. G. Eom, M. C. Lee A new method for acquiring true stress-strain curves over a large of strains using atensile test and finite element method Mechanics of Materials Mechanics of Materials 2007
B. Y. Joun, S. M. Kim, M. C. Lee, R. H. Park, M. S. Joun Prediction of Geometic Dimension for Cold Forgings Using The Finite Elment Method Journal of Materials Processing Technology 459-465 Journal of Materials Processing Technology 2007
H. J. Kim, M. S. Joun Effects of Deposition Temperature and Time on the Surface Characteristics of TiN-coated High-speed Steel by Arc lon Plating Journal of Machanical Science and Technology21 575-584 Journal of Machanical Science and Technology21 2007
M. C. Lee, M. S. Joun, J. G. Lee Adaptive tetrahedral element generation and refinement to improve the quality of bulk metal forming simulation Finite Element Analysis and Design 788-802 Finite Element Analysis and Design 2007
H. G. Mun, J. S. Lee, S. J. Yoo, M. S. Joun, J. G. Lee Hot Deformation Behavior of Bearing Steels ASME Transaction, J. Eng. Material and Technology 349-355 ASME, Transaction, J. Eng. Material and Technology 2007
M. C. Lee, M. S. Joun, J. K. Lee Adaptive tetrahedral element generation for bulk metal forming simulation 7th World Congress on Computational Mechanics 7th World Congress on Computational Mechanics 2006
H. K. Moon, M. C. Lee,J. H.Chung, M. S. Joun Finite Element analysis of a rotary forging process for bearing assembly 8th International Conference on Technillogy of Plasticity 333-334 Advanced Technology of Plasticity 2005
M C LEE, M S Joun Automated adaptive tetrahedral element generation for three-dimensional metal forming simulation 8th International Conference on Technillogy of Plasticity 253-254 Advanced Technology of Plasticity 2005
M C LEE, M S Joun High Quality Mesh Generation for Three-Dimensional Metal Forming Simulations CSME 525-531 CSME 2005
J. W. Yang et al. Mechanics of femoral head osteonecrosis using three-dimensional finite element method Arch. Orthop. Trauma Surg. 88-92 Springer-Verlag 2002
M. S. Joun, M. C. Lee and J. M. Park Finite element analysis of prestresses die set in cold forging Int. J. Mach Tools & Manu. 1213-1222 Pergamon 2002
S. W. Lee, M. S. Joun Finite element simulation of the cold forging process having a floating die Journal of Materials Processing Technology 121-126 Elsevier 2001
S.W. Lee, M.S. Joun Rigid-viscoplastic finite element analysis of the piercing process in the automatic simulation of multi-stage forging process Journal of Materials Processing Technology 207~214 Elsevier 2000
M.S. Joun, H. I. Lee From Continuum Mechanics To Finite Element Method Prentice-Hall 2000
C.S. Im, S.R. Suh, M.C. Lee, J.H. Kim, M.S. Joun Computer aided process design in cold-former forging using a forging simulator and a commercial CAD software Journal of Materials Processing Technology 155-163 Elsevier 2000
M. S. Joun Commun. Numer. Meth. Engng Iterative and non-iterative schemes for coulomb frictional law in metal forming simulation and their numerical characteristics 515~525 John Wiley & Sons 1999
M. S. Joun, J. H. Chung and R. Shivpuri An Axisymmetric forging approach to preform design in ring rolling using a rigid-viscoplastic finite element method Int. J. Mach Tools&Manu. 1183~1191 PERGAMON 1998
M. C. Lee, M. S. Joun General Approach to Automatic Generation of Quadrilateral Finite-Elements on Three-Dimensional Surfaces Comm. Num.Meth. Engrg. 609~620 John&Wiley 1998
M. S. Joun, H. K. Moon and R. Shivpuri Automatic Simulation of a Hot-Former Forming Process by a Rigid-Thermoviscoplastic Finite Element ASME ASME 1998
M. S. Joun, S. M. Hwang Die Shape Optimal Design in Three-Dimensional Shape Metal Extrusion by the Finite Element Method Int. J. Num.Methods Eng. John&Wiley 1998
M. S. Joun, S. W. Lee and J. H. Jung Finite Element Analysis of a Multi-Stage Axisymmetric Forging Process having a Spring-Attached Die for Controlling Metal Flow Lines Int. J. Mach Tools & Manu. 843~854 Pergamon Press 1998
M.S. Joun, J.H. Chung, R. Shivpuri An Axisymmetric forging approach to preform design in ring rolling using a rigid-viscoplastic finite element method Int. J. Mach Tools & Manu. 1183-1191 Pergamon Press 1998
M. S. Joun and M. C. Lee Quadrilateral Finite-Element Generation and Mesh Quality Control for Metal Forming Simulation Int. J. Num.Meth. Engrg. 4059~4075 John Willy & Sons 1997
M.S. Joun, S.R. Rhu, S.M. Hwang A New Guide-Grid Approach to Automatic Forging Simulation Compas 1995